Motor DriversCompatible
L298N Dual Motor Driver Module
Drive two DC motors (speed and direction) or one stepper motor from Arduino or ESP32. 5–35 V motor supply, up to 2 A per channel, built-in 5 V regulator and heatsink.
- Driver IC
- ST L298N
- Channels
- 2 DC motors or 1 stepper
- Motor Supply
- 5–35 V
- Output Current
- 2 A per channel (peak 3 A)
- Logic Voltage
- 5 V
- Voltage Drop
- About 2 V
₹0.00
Inclusive of all taxes1
7 Days Return
Cash On Delivery
Safe & Secure
Specifications
- Manufacturer Part Number
- L298N
- Driver IC
- ST L298N
- Channels
- 2 DC motors or 1 stepper
- Motor Supply
- 5–35 V
- Output Current
- 2 A per channel (peak 3 A)
- Logic Voltage
- 5 V
- Voltage Drop
- About 2 V
- On-board Regulator
- 5 V (jumper, supply ≤ 12 V)
- Control Pins
- ENA, IN1, IN2, IN3, IN4, ENB
- Board Size
- 43 × 43 × 27 mm
Description
The go-to motor driver for robot cars. Two full H-bridges let you run two DC motors forward and backward and control their speed with PWM – or drive one bipolar stepper motor.
Features
- ST L298N dual full-bridge driver with a large heatsink
- Motor supply 5–35 V, up to 2 A per channel
- Control inputs IN1–IN4, speed via ENA / ENB (PWM)
- On-board 5 V regulator: with the 5V-EN jumper on and a supply up to 12 V, the 5 V terminal can power your Arduino
- Screw terminals for motors and power
Good to know
The L298N loses about 2 V inside the driver, so a 7.4 V battery gives the motors roughly 5.4 V. Remove the 5V-EN jumper when the motor supply is above 12 V and feed 5 V to the logic separately. Always connect the Arduino GND to the driver GND.
Package includes
1 × L298N motor driver module