GPS & GNSS ModulesCompatible
NEO-6M GPS Module with Antenna
u-blox NEO-6M GPS receiver with a 25 mm ceramic patch antenna, backup battery and EEPROM. Outputs position, speed and time over serial – for trackers, drones and time-sync projects.
- Receiver
- u-blox NEO-6M
- Channels
- 50
- Accuracy
- About 2.5 m CEP
- Update Rate
- 1 Hz default (up to 5 Hz)
- Cold Start
- About 27 s (open sky)
- Interface
- UART, 9600 baud default, NMEA
₹0.00
Inclusive of all taxes1
7 Days Return
Cash On Delivery
Safe & Secure
Specifications
- Manufacturer Part Number
- NEO-6M
- Receiver
- u-blox NEO-6M
- Channels
- 50
- Accuracy
- About 2.5 m CEP
- Update Rate
- 1 Hz default (up to 5 Hz)
- Cold Start
- About 27 s (open sky)
- Interface
- UART, 9600 baud default, NMEA
- Supply Voltage
- 3–5 V
- Antenna
- 25 × 25 mm ceramic patch (u.FL)
- Extras
- EEPROM, backup battery, fix LED
- Pins
- VCC, RX, TX, GND
Downloads
Description
Connect four wires and the module streams standard NMEA sentences with latitude, longitude, altitude, speed and UTC time. The TinyGPS++ Arduino library turns them into ready-to-use numbers.
Features
- u-blox NEO-6M receiver, 50 channels, GPS L1
- Horizontal accuracy about 2.5 m (open sky)
- Update rate 1 Hz by default (up to 5 Hz)
- UART at 9600 baud (default), NMEA output
- EEPROM saves your settings; backup battery keeps data for a faster warm start
- 3–5 V supply, 25 × 25 mm ceramic patch antenna on a u.FL cable
Good to know
The first fix (cold start) needs a clear view of the sky and can take 30 seconds to a few minutes – it usually won't get a fix indoors. The blue LED blinks once a second when it has a position fix.
Package includes
1 × NEO-6M GPS module, 1 × ceramic patch antenna, 1 × pin header